pcbjunkie
JAMMA to Sega System 16 Cabinet Adapter
Couldn't load pickup availability
Allows you to play your JAMMA games in a cabinet wired according to the Sega System 16 pinout class. This pinout class is compatible with many Sega games from about 1985 to the early 1990. See list below.
Please confirm the pinout in the table below matches the wiring of your cabinet. This is especially important for cabinets that have less than 3 buttons and only one coin switch.
Cabinet Compatibility
Cabinet Compatibility
This is the list of compatible games that can be used with this adapter:
- Fantasy Zone
- Major League
- Action Fighter
- Alex Kidd: The Lost Stars
- Alien Syndrome
- Body Slam
- Dump Matsumoto
- Dunk Shot
- Quartet
- Quartet 2
- Time Scanner
- Center Court
- DakkoChan Jansoh
- Heavyweight Champ
- M.V.P.
- SDI – Strategic Defense Initiative
- Shinobi
- Sonic Boom
- Altered Beast
- Juuouki
- Passing Shot
- Tetris (Sega)
- Bay Route
- Cotton
- Dynamite Dux
- ESWAT Cyber Police
- Flash Point
- Golden Axe
- Tough Turf
- Wonder Boy III – Monster Lair
- Wrestle War
- Aurail
- Riot City
Voltages
Voltages
This adapter does not support the -5V power rail which is not present in Sega cabinet wiring harnesses. Games that require -5V may not run.
Inputs and Outputs
Inputs and Outputs
In most circumstances this adapter will work as intended with your cabinet without any modifications. Problems may occur playing some JAMMA games in a modified cabinet with less than 3 buttons, or only one coin switch present.
If the button order is wrong you may need to swap the wires going to the buttons behind the control panel. If a button doesn’t register at all, say only JAMMA button 2 and 3 work, you may need to run a jumper from button 3 to button 1 at the cabinet wire harness edge connector.
Pinout
Pinout
SOLDER SIDE |
PARTS SIDE |
GND |
GND |
GND |
GND |
+5V |
+5V |
+5V |
+5V |
+12V |
+12V |
COUNT2 |
COUNT1 |
KEY |
KEY |
P2B3 |
P1B3 |
P2B2 |
P1B2 |
P2B1 |
P1B1 |
P2B4 |
P1B4 |
P2DOWN |
P1DOWN |
P2UP |
P1UP |
P2RIGHT |
P1RIGHT |
P2LEFT |
P1LEFT |
NC |
NC |
NC |
NC |
NC |
NC |
NC |
NC |
P1START |
COIN1 |
P2START |
COIN2 |
NC |
TEST |
NC |
SVC |
SPK- |
SPK+ |
VGREEN |
VRED |
VSYNC |
VBLUE |
GND |
GND |
GND |
GND |
Dimensions
Dimensions
Size: 50x113mm
Weight: 50g
Shipping & Returns
Shipping & Returns
Standard 30 days return policy. Buyer pays for return shipping. See Return policy page for more information.
Share


